Views: 0 Author: Site Editor Publish Time: 2023-01-06 Origin: Site
Monoblock heat pump is suitable for indoor swimming pools, hotels, villas, hair salons, bathing and pedicures, factories, schools, farms and other places that require hot water central heating. The monoblock heat pump can be used for cooling at the same time during the heating process, and it can also be installed in places where cooling capacity is required, but the requirements are not high.
What is the difference between a monoblock heat pump and a split heat pump?
Why does the monoblock heat pump need to be used with an air conditioner?
How to install and operate monoblock heat pump?
The heat pump unit is divided into integral type and split type. Monoblock heat pump adopts advanced heat pump technology to suck the humid air in the swimming pool into the unit, and part of the indoor air is discharged to the outside, and most of it is dehumidified and sent to the swimming pool together with the fresh air. Monoblock heat pump can effectively solve the problems of indoor swimming pool wall frosting and decorative corrosion, and provide swimmers with a comfortable swimming environment.
The split heat pump unit is widely used in the constant temperature, heating and dehumidification of indoor swimming pools. It has the characteristics of stable performance, safety and environmental protection, and high operating efficiency. It is very practical for large and medium indoor swimming pool projects such as clubs, resorts, gymnasiums, etc.
Because the monoblock heat pump is basically used to condense and dehumidify the humid air, and the recovered heat is given priority to heating the air and then heating the water, so there is no excess cold and heat source to the temperature required in summer and winter, so it is necessary to connect an air conditioner and heating unit.
Monoblock heat pump is usually installed on the kitchen balcony, and the air outlet is connected to the kitchen through the air duct, so that the cold air blown out can directly enter the kitchen to achieve the cooling effect. During installation, it is only necessary to connect the hot and cold water inlet to the cold and hot water reserved in the house, and it can be used when it is connected. The installation is very simple.
monoblock heat pump mostly adopts microcomputer intelligent controller, which has time setting, timer switch function, water temperature setting, ventilation setting, overheating protection and other intelligent control functions. However, most of the functions have been set by the manufacturer at the factory, and you can directly use the default values. Basically, you only need to set the temperature you need (usually set at 45-50 degrees) and you can use it.
Guangzhou Realm Energy Saving Equipment Co. Ltd., which has been established for over ten years, focuses on the production of monoblock heat pumps. Here, you can find the monoblock heat pumps you need.