RMRB 33.6KW DC Inverter Heat Pump with Wifi Controler

RMRB 33.6KW DC Inverter Heat Pump with Wifi Controler

Dear customers,
You can choose monoblock or split air source heat pumps according to environmental needs!
Simple selection of air source combined supply system
3HP building area is 60-80 square meters, and the selected flow of water pump is 1.56m ³/ h. The lift is 13m-18m.
4HP building area is 70-90m2, and the selected flow of water pump is 2.1m ³/ h. The lift is 13m-18m.
5HP building area is 90-120 square meters, and the selected flow of water pump is 2.6m ³/ h. The lift is 13m-18m.
6hp building area is 110-150 square meters, and the selected flow of water pump is 3M ³/ h. Lift: 13m-18m.
8HP building area is 150-180 square meters, and the selected flow of water pump is 3.8m ³/ h. The lift is 13m-18m.
10HP building area is 180-250m2, and the selected flow of water pump is 5.8m ³/ h. The lift is 15m-20m.

The benefits of air source heat pumps:
• Lower fuel bills, especially if you are replacing conventional electric heating
• Receive income through the UK government's Renewable Heat Incentive (RHI)
• Lower home carbon emissions, depending on which fuel you are replacing
• No fuel deliveries needed
• Can heat your home as well as your domestic water
• Minimal maintenance requiRed
• Easier to install than a ground source heat pump.

Projects of our Heat pump

Welcomed to Contact with us for more informations!

Characteristic
1. The unit uses air as the heat source for refrigeration, heating and high-temperature hot water. Its efficiency is up to 300-500%.
2. Water and electricity are isolated without any pollution discharge. It is environmentally friendly, reliable, energy-saving, reliable and convenient.
3. The unit works around the clock with large water production. It can realize centralized water supply.
4. The system is more reliable and efficient by adopting the method of circulating heating.
5. Refrigeration, heating, haze removal, floor heating, comfort and energy saving.

Performance Introduction
a. The machine can run heating, refrigeration, hot water, refrigeration and hot water, heating and hot water operation modes.
b. The motherboard can set model parameters.
c. It has multiple temperature sensors to ensure detailed and accurate sampling of the working state of the machine. All temperatures can be queried and displayed on the main controller.
d. Each compressor has high-voltage protection, low-voltage protection, exhaust temperature protection and current overcurrent protection to ensure reliable operation of the machine
e. Efficient and accurate electronic expansion valve control algorithm.
f. Lack of phase and wrong phase will cause the whole machine to stop running.
g. The waterway has safety measures such as waterway switch and low-temperature antifreeze protection.
h. Real time timing switch function.

Compatible with different kinds of terminals
In the air source combined supply system, the indoor end system includes fan coil, low-temperature radiator, floor heating, etc.
Fan coil can be used for refrigeration and heating, and the heating comfort is poor.
Radiators and floor heating are only used for heating.
The best combination is fan coil refrigeration in summer and floor heating in winter

Our Main Products parts

Our enterprise

Our servise

1.7*24 Hours Servise
2.Well-train and experienced team 
3.Quality Control
4.After sales Service
6.Vieco Factory Check

FAQ:

Q1: Are you a manufacturer?
A: Yes, we are a professional heat pump manufacturer since 2005, with experienced and outstanding R&D team, production, marketing and service supplying.

Q2: What are your main products?
A: Our products include air source heat pump, water source heat pump, geothermal heat pump, swimming pool heat pump, super low noice heat pump and EVI heat pump for cold climate etc.

Q3: How about the lead time?
A: It will take 15-30 working days for general order. And needs to negotiated for large and customized orders.

Q4: Do you provide OEM/ODM customizid service?
A: Yes, we warmly welcome your OEM/ODM orders. We can produce standard heat pumps under your brand and according to your special needs.

Q5: Can l become your heat pump agent/distributor?
A: Yes, we warmly welcome you become our heat pump agent/distributor who can distribute our heat pumps in your local country.

Q6: How to place an order?
A: You can contact us via email or online service at any time, we will offer you ralated product information and help you to place an order.

Q7: What is your terms of payment ?
A: Payment<=10000USD, 100% in advance. Payment>10000 USD, 30% T/T in advance , 70% balance before shippment or against B/L copy.