What is the workflow of an air source heat pump?

An air source heat pump is an energy-saving device that uses high-level energy to direct heat from a low-level heat source to a high-level heat source. Air as a ground-level heat source of the heat pump is inexhaustible, available everywhere and available free of charge. In addition, the installation and use of air source heat pumps are relatively convenient.

What is the maintenance method of the air source heat pump?

What is the workflow of an air source heat pump?

Why is the air source heat pump very energy efficient?

What is the maintenance method of the air source heat pump?

1. Air source heat pump water heaters are devices with a high degree of automation. During use, a regular check of the condition of the device is carried out. If the device can be effectively maintained and serviced for a long time, the operational safety and service life of the device will be unexpectedly improved.

2. For air source heat pump water heaters, always check that the power supply of the appliance and wiring of the electrical system are solid and that the electrical components have abnormal movements. If this is the case, they should be repaired and replaced in time.

3. The water filter installed outside the machine should be cleaned regularly to ensure that the water quality in the system is clean, to avoid damage to the main motor by the dirty filter of the unit.

4. Do not stack small parts around the unit so as not to block the air inlet and outlet. The environment of the device should be clean, dry and well ventilated.

What is the workflow of an air source heat pump?

The working principle of the air source heat pump is to absorb the heat in the air (through the refrigerant/refrigerant), release it to the water, circulate to heat the water, and at the same time release the low temperature air that it has lost a lot of energy to the kitchen or other places that need to be cooled. For kitchen or other cooling requirements. When the air loses energy to lower the temperature, a large amount of water vapor is condensed, greatly reducing the humidity of the cold air released, which is equivalent to a dehumidification effect. Therefore, it can integrate the functions of energy-saving central hot water, kitchen cooling (toilet cooling) and local dehumidification, greatly improving cost performance. The operating temperature of the air/water heat pump is minus 10–40 degrees Celsius. With this technology, an air source heat pump can effectively save energy, and its operating cost is only 1/4 of the operating cost of an electric water heater. 1/2 of the oil boiler.

Why is the air source heat pump very energy efficient?

The heat pump absorbs the air heat source to produce hot water, and the energy-saving efficiency is more than four times higher than that of the electric water heater, and it is more energy-saving than the solar water heater. It is the most advanced energy saving and environmentally friendly hot water system in the world. The operating costs of the air source heat pump are 1/4 of the electric boiler, 1/3 of the oil boiler and 1/2 of the gas boiler, which is more energy efficient than the solar water heating system. The energy efficiency ratio is high and the energy saving effect is very obvious.

RMRB is the well-known brand of heat pump water heater in China and an AAA member unit for national quality, reputation and service.