What is the workflow of split heat pump?

The split heat pump's system is a fully electrical system with individual components working together to produce heating and cooling. Split heat pumps have an advantage over standard air conditioners because they can run in reverse and provide great heating options on a low budget.

What is the workflow of split heat pump?

How is the noise reduction function of split heat pump reflected?

What is the structural composition of split heat pump?

What is the workflow of split heat pump?

First, first consider how the heat builds up. Split heat pumps flow into your home when buildings store less heat than outside. If the heat flowing into your home is given at a rate of "1 unit per hour" then your air conditioner will always be pumping out 1 unit of heat per hour. If you turn off the air conditioner and let the heat build up, you could have up to eight hours of heat by the end of the day.

However, split heat pumps are usually less than that -- there's a limit to how much heat a home can store. The amount of heat entering your home depends on how hot the building was when it started. For example, if your home can only store 5 units of heat energy until it equilibrates with the outside air temperature, at the end of the day you only need to remove up to 5 units of heat.

Also, as your home heats up, the heat transfer process slows down; eventually, when the inside temperature is the same as the outside temperature, the split heat pump reaches zero heat transfer at equilibrium. Your air conditioner also cools less effectively in extreme heat, so keeping it off during the hottest part of the day can improve the overall efficiency of the system.

How is the noise reduction function of split heat pump reflected?

The split heat pump raises the airtight seal of the main unit to reduce airborne noise, and adds rubber shock absorbers during installation. The indoor water pump is changed to a canned pump, and the soft connection of the water pump and the basic shock absorption of the water pump can also be adopted. For the project where the end of the split heat pump is an air disc, choose a silent motor or add a shock-absorbing rubber pad at the connection between the angle iron bracket and the steel structure to reduce noise.

What is the structural composition of split heat pump?

1. Unit condensate water treatment

Split heat pump optimizes the drainage path of condensed water, increases the size of the water inlet, and designs a larger volume of the water receiving tray.

2. Pluripotent complementarity

The heat pump of split heat pump + other forms of complementary energy sources, the key lies in the control of the system, which needs to be switched seamlessly, otherwise a problem in one link will affect the effect and energy efficiency of the entire system.

3. Large water tank and valley electricity energy storage technology

Split heat pump adopts a large water tank heat storage method, considering the installation position of the water tank, the size of the water tank, the selection and configuration of the unit, and the design of heat storage using valley electricity.

For more information about split heat pump, please contact Guangzhou Realm Energy Saving Equipment Co. Ltd. has committed to providing the increasing of split heat pump, and making them more effective, reliable, and consistent.