Why choose monoblock heat pump?

Monoblock heat pump usually has a service life of more than 10 years, does not contain consumable heating elements, generally does not need to replace components, and does not require deliberate maintenance under normal use. When installing the monoblock heat pump, pay attention to relevant protection to avoid heavy rain and strong sunlight.

Why choose monoblock heat pump?

What are the structural characteristics of monoblock heat pump?

What parts does the monoblock heat pump include?

Why choose monoblock heat pump?

1. Green and environmental protection: Gas water heaters heat hot water by burning combustible gas, and at the same time emit a large amount of harmful waste gas such as carbon dioxide and sulfur dioxide. The monoblock heat pump just transfers the heat from the surrounding air to the water, making it a true eco-friendly water heater.

2. Low-carbon fashion: In today's trend of energy saving and emission reduction, saving energy and reducing carbon emissions is a fashionable way of life. Monoblock heat pump adopts the inverse Carnot principle, which transfers the energy in the air to the water instead of directly heating it with an electric heating element, so its energy efficiency can reach 4 times that of an electric water heater, that is, it heats the same amount of hot water and consumes a similar amount of electricity. It is a quarter of the electric water heater, which greatly saves the power consumption.

What are the structural characteristics of monoblock heat pump?

1. Monoblock heat pump is equipped with a high-efficiency scroll or rotor compressor, with high efficiency; the source water side is a patented coaxial casing-type water-refrigerant heat exchanger, and the steel tube is covered with a twist-shaped high-efficiency heat exchange copper tube, which can exchange heat. High efficiency, large water flow channels, no hidden dangers similar to the freezing crack of plate heat exchangers in winter.

2. The box of the monoblock heat pump is surrounded by special sound-absorbing materials, and the compressor and fan are installed with vibration reduction treatment, so that the operation is quiet. Besides, the monoblock heat pump has an intelligent interface and a dedicated centralized wire controller.

3. Each monoblock heat pump is passed the full load test at the factory before leaving the factory.

4. Monoblock heat pump provides cold and hot air; it can be used in boiler/cooling tower water ring system, water source system or ground source system; a variety of air outlet methods can be selected; there are three types of single cooling type, single heating type, and cold heating type model.

What parts does the monoblock heat pump include?

Monoblock heat pump is powered by electricity, and uses circulating water drawn from wells, lakes, rivers, oceans or circulating water buried in underground coils as the source of cold (heat) to provide high-quality cold (warm) indoors wind. The refrigeration system of each refrigeration circuit consists of a hermetic compressor, coaxial casing water-refrigerant heat exchanger, air side coil, thermal expansion valve, service valve, four-way reversing valve and safety control components. The compressors of the units are mounted on heavy duty rails to dampen compressor vibrations. The compressor is also mounted on neoprene shock absorbers, a double damping measure that minimizes noise and keeps the unit running quietly.

Guangzhou Realm Energy Saving Equipment Co. Ltd. maintains close relationships with customers in monoblock heat pump industry, and is committed to strengthening production and operation, improving quality and safety.